汽车
感应加热用于汽车行业的各个领域。ENRX 是值得信赖的供应商，它与世界各地的汽车制造商、一级供应商和分包商合作。
简介
汽车行业向工业 4.0 的转变，以及一体化供应链，说明感应加热过程易于控制和监控。感应加热可用于大多数车身面板、底盘、传动系统、电气或发动机部件的金属热处理。即使 ENRX 在汽车行业已经发展数十年，我们仍在不断寻找新的方法来提高加热效率、工艺和结果。
- 金属车辆部件的感应加热
- 许多电动汽车组件的感应加热
- 用于实现智能工厂愿景的感应加热
图片
-
ENRX is the world’s largest induction hardening equipment maker with more than 70 years’ experience.
-
Customised coil for induction hardening of camshafts.
-
ENRX induction camshaft hardening solutions are used by many of the leading names in the truck, bus, excavator and earth-moving equipment industries. Our systems are also widely used to harden marine camshafts.
-
High troughput and consistent heating outcomes are essential when heat treating bars and shaft
-
ENRX design, make and maintain customised coils for camshaft hardening. These formed coils deliver precise heat patterns and penetration depts for perfect hardening results.
-
An ENRX robot-type crankshaft hardening system in action. All our systems feature mechanical and control innovations that minimize Total Indicated Run-Out
-
Car crankshafts, truck crankshafts, marine crankshafts - ENRX systems are used worldwide to harden every imaginable type of crankshaft in a wide range of production volumes.
-
Seamless induction hardening of large rings and gears.
-
Induction hardening uses induced heat and rapid cooling (quenching) to increase the hardness and durability of steel.
-
Induction hardening increases the hardness and durability of steel
-
A programmable quenching cycle in work
-
A HardLine Centerless Pusher machine heat treats steel bars
-
Induction hardening of steering rack
-
Double hardening for double productivity. The quenching phase inside a single cabinet hardening machine with twin tailstocks and centres.
-
Induction brazing of aluminium parts
-
ENRX has unrivalled expertise in making efficient solutions for aluminium brazing.
-
Induction is a high troughput, no-contact heating method. It helps ensure strong yet barely visible joints-and the oustanding aesthetics expected by today's customers.
-
High-quality banjo nipples being brazed under a controlled atmosphere in a customised ENRX brazing machine.
-
Induction brazing of brake linings
-
Induction heating is a perfect method for high troughput brazing of evaporator and condenser connections
-
Induction brazing of a heat exchanger.
-
Induction is the preferred bonding method in the automotive industry.
-
.png?mw=640&mh=1024)
Induction is the main method for curing adhesives and sealants for car components such as doors, hoods, fenders, rearview mirrors and magnets.
-
.png?mw=640&mh=1024)
Induction bonding is the primary method for aluminium and steel panel heating
-
Induction bonding. Universal fixture for lab/process trials
-
Full-ring bonding with two-turn flexible coil
-
Aluminium hood spot bonding tool. Note: The absence of clamps, minimal nest and realtively small curing areas.
-
球头螺栓和壳体的淬火和回火
-
制动卡钳的淬火和回火
-
活塞杆的淬火和回火
-
等速万向节的淬火和回火
-
.jpg?mw=640&mh=1024)
传动部件的淬火和回火变速器轴承的热装热卸
-
车轮轴承、轮毂和轮轴的淬火和回火
-
.jpg?mw=640&mh=1024)
转向部件的淬火和回火
-
驱动轴的淬火、回火和焊接
-
.jpg?mw=640&mh=1024)
转子轴和电机外壳的淬火、回火和热装热卸
-
转子轴的淬火、回火和热装热卸。电机外壳热装。干燥转子和定子上的树脂涂层。
-
ENRX（易孚迪）的回火解决方案适用于汽车和汽车零配件行业。
.png?mw=697&mh=456)
.png?mw=697&mh=456)
.jpg?mw=697&mh=456)
.jpg?mw=697&mh=456)
.jpg?mw=697&mh=456)
