To main content
ENRX-HeatLine-melting-and-forging-equipment

HeatLine：感应加热机床

用于熔炼和锻造应用的全系列系统，配有多个输出功率和频率的串联和/或并联补偿式感应电源。 

联系我们

简介

从大批量锻造到专业熔炼应用，HeatLine 熔炉和加热机床可用于各种用途。自动的感应器换型和负载匹配令 HeatLine 在锻造方面特别富有成效。精准浇铸、短时融化和便捷的坩埚更换是 HeatLine 熔炉的标志。

  • 可实现比替代性感应源和加热技术更高的效率比。 
  • 每一次都获得非常理想的加热效果（变频器、感应器和控制软件）
  • 更大限度减少干扰，降低灰尘和噪声水平，同时降低环境热量增加 
Induction heating solution for bar end and partial heating
相关应用
锻造
熔炼
相关行业
电工、家用电器和 HVAC
一般行业

HeatLine 系列

图片

  • A new 1.200 kilo-capacity single-axis tilting furnace being installed at a bearing manufacturer’s facility.

    A new 1.200 kilo-capacity single-axis tilting furnace being installed at a bearing manufacturer’s facility.

  • An ENRX induction furnace at work. This graphite crucible contains molten brass.

    An ENRX induction furnace at work. This graphite crucible contains molten brass.

  • FIB is our range of single-axis tilting furnaces. The FIB coreless (shown here) features an innovative coil design that maximises efficiency.

    FIB is our range of single-axis tilting furnaces. The FIB coreless (shown here) features an innovative coil design that maximises efficiency.

  • ENRX furnaces maximise productivity and product quality. For example, the dedicated crucibles in moving coil furnaces eliminate inter-alloy contamination.

    ENRX furnaces maximise productivity and product quality. For example, the dedicated crucibles in moving coil furnaces eliminate inter-alloy contamination.

  • Induction melting is a process where metal is melted into liquid form in an induction furnace’s crucible. The molten metal is then poured from the crucible, usually into a cast.

    Induction melting is a process where metal is melted into liquid form in an induction furnace’s crucible. The molten metal is then poured from the crucible, usually into a cast.

  • Induction heating is a smart and proven way of melting metal and glass.

    Induction heating is a smart and proven way of melting metal and glass.

  • Automated, high-output solutions for bar end and partial heating.

    Automated, high-output solutions for bar end and partial heating.

  • An ENRX CHV vertical heater. Capable of heating any type of profile, including preformed components, the CHV supports manual and robot loading.

    An ENRX CHV vertical heater. Capable of heating any type of profile, including preformed components, the CHV supports manual and robot loading.

  • Induction forging uses induction to heat metal parts before they are shaped or ‘deformed’ by presses or hammers.

    A heated workpiece being ejected from a CBB horizontal heater. The CBB ejects parts in a single location – a major benefit for operators.

  • Designing unique, customised bar end solutions is an ENRX strength. Our technical capabilities let us meet virtually any customer-specific requirements.

    Designing unique, customised bar end solutions is an ENRX strength. Our technical capabilities let us meet virtually any customer-specific requirements.

  • ENRX bar end and partial heaters are field-proven systems used by many manufacturers around the world. Each system is backed by the resources and service capabilities of ENRX.

    ENRX bar end and partial heaters are field-proven systems used by many manufacturers around the world. Each system is backed by the resources and service capabilities of ENRX.

  • ENRX billet heater heat practically any dimension of billets and slugs in materials as diverse as stainless steel, copper, aluminium, titanium and brass.

    ENRX billet heater heat practically any dimension of billets and slugs in materials as diverse as stainless steel, copper, aluminium, titanium and brass.

联系我们