预热
感应预热是一种在对材料或工件做进一步加工之前通过感应技术对其进行加热的工艺。
简介
使用预热的原因因行业而异。在电缆和电线行业中，电缆芯会在绝缘挤压之前进行预热。钢带会在酸洗和镀锌前进行预热。感应预热还可以在弯曲之前软化金属，以及备好管材进行焊接。移动预热解决方案有助于轴承组件的现场维修。
- 极为高效的预热，大大节约能源
- 循环时间短和连续自动匹配意味着单个感应器可以处理广泛的产品范围
- 体积小且易于集成到现有或规划的生产线中
图片
-
An operator replaces a bearing that has been heated with an ENRX mobile Minac system
-
ENRX systems have been used for hot tap welding on the bed of the North Sea: Photo: Technip Norge AS.
-
Specialist coils being tested for the Tampen subsea hot tapping procjet. Photo: Technip Norge AS
-
An medium-frequency ENRX Sinac pre-heats seamless offshore pipe prior to coating.
-
No dust, no fumes, no noise. An ENRX heater gets to grips with 170 mm anode stubs.
-
.png?mw=640&mh=1024)
Induction heating is increasingly used to remove the giant nuts and bolts in power stations’ turbines.
-
ENRX designs and builds specialised systems for steel strip and wire and cable pre-heating.
-
Minac units are frequently flown to oil platforms to perform repairs and maintenance.
-
The “Safe Concordia” accommodation and support platform. A mobile ENRX Minac system was used to pre-heat the weld area during the welding of a patch onto a crane tower.
-
An example of induction pre-heating: the pipe is being heated prior to receiving an anti-corrosive coating.
-
An induction coil specially designed and built for offshore industry requirements. Once heated by the coil (in red) the pipe can receive an anti-corrosion covering.
-
Preheating before welding of baseplate
-
Preheating before welding of tower rings
.png?mw=697&mh=456)
